ADTRAN T1-FT1 - Manual (Page 59)

Chapter 3. Operation
61200060L1-1 TSU User Manual 3-23
The up and down scroll keys will also move the cursor to
different fields to edit. Pressing
CANCEL at any time can be
used to end the editing process.
2)Software Rev, Submenu of 3)Util
Use the Software Revision submenu to access the display of
the current software revision level. This information is
required when requesting assistance from ADTRAN
Customer Service or when updates are needed.
Follow standard operating procedure to access the 3)UTIL
menu items.
1. With the cursor on 2)SOFTWARE REV , press the ENTER
key. The the current software revision level displays.
2. Use the CANCEL key to exit.
3)Reinit Unit, Submenu of 3)Util
Reinit Unit submenu is used to re-initialize the unit. This
menu item is not used to restore the factory default settings
for all parameters.
1. Follow standard operating procedure to access the 3)UTIL
menu items.
2. With the cursor on 3)REINIT UNIT , press ENTER .
The unit reinitializes all the hardware and performs a self-
test.