ADTRAN T1-FT1 User Manual
Page 58
Chapter 3. Operation
3-22
TSU User Manual
61200060L1-1
1.
With the cursor on
1)TIME/DATE
press
ENTER
. The
results display the current time and date with the cursor
on the
T
in Time.
2.
Press
ENTER
to move to the first time position (hour).
Use one or two number keys to set the desired hour.
3.
Press
ENTER
. The cursor moves to the second time
position (minutes).
4.
Use one or two number keys to set the desired minutes.
Press
ENTER
. The cursor moves to the third time position
(seconds).
5.
Use one or two number keys to set the desired seconds.
Press
ENTER
. The cursor again moves to the third time
position.
6.
Press the down scroll key to move to
DATE
. The cursor is
on the
D
of
DATE
.
7.
To set the Date use the same keystroke pattern as for
setting the Time.
8.
To exit the
TIME/DATE
setting, press
ENTER
after making
the last desired change.
9.
Press the
CANCEL
key.
The unit returns to the opening of
TIME/DATE
setting with the
cursor on the
T
of
TIME
. Any settings completed with an
ENTER
keystroke have been recorded. Any settings not
completed by an
ENTER
keystroke are not recorded.
Keystroke Summary for Editing Time/Date:
Pressing
ENTER
after any numeric change always records the
entry and moves to the next editing position. If
ENTER
is
pressed at the editing position without making any change,
the cursor moves to the next editing position.
T I M E : 0 5 : 0 7 : 0 6
D A T E : 0 8 / 0 5 / 9 3