Nd filter 63, Cop y – Canon EOS C300 PL User Manual

Page 63

ND Filter

Using the ND filters allows you keep the aperture within an appropriate
range when recording in bright surroundings*.

* Closing down the aperture when recording under bright conditions may cause the

picture to appear soft or out of focus. To avoid the loss of sharpness due to diffraction,
use a denser ND filter or a faster shutter speed (A 58).

Using the ND Filter

Press the ND FILTER + or - button to select the desired ND filter setting.

• Repeatedly pressing ND FILTER + button will change the ND filter setting in the following order: [ND1 2 stops]

[ND2 4 stops] [ND3 6 stops] ND filter off. (The ND FILTER - button cycles through the settings in
reverse order.)

Remote Operation Using Wi-Fi Remote

After completing the necessary preparations (A 47) you can adjust the ND filter
remotely from a Wi-Fi-enabled device using the Wi-Fi Remote application.

Press [ND +] or [ND -] on the Wi-Fi Remote screen.

• The function is identical to that of the ND FILTER + and - buttons on the

camcorder.

• The selected ND filter setting will be displayed on the Wi-Fi Remote screen and

will be applied on the camcorder.

NOTES

• Depending on the scene, the color may change when turning the ND filter on/off. Setting a custom white

balance (A 66) may be effective in such case.

Operating modes:

COP

This manual is related to the following products:

EOS C300