Canon EOS C300 PL - Manual (Page 110)

Customizing Functions and Onscreen Displays
110
Customizing Functions and Onscreen Displays
Customize the camcorder to match your shooting style and needs. Use the [w Other Functions] > [Custom
Function] setting to adjust how some of the camcorder’s controls and functions operate in
mode.
Similarly, use the [£ LCD/VF Setup] > [Custom Display 1] or [Custom Display 2] setting to customize the
onscreen displays that appear during recording. You can save these preferences along with other menu settings
to an SD card and use them again later (A 111).
Customizing Functions
The following table describes which functions can be customized using
[Custom Function]. For more details, refer to
[Custom Function] (A 154).
1 Open the [Custom Function] submenu.
[w Other Functions] > [Custom Function]
2 Select the desired function.
3 Change the setting option and then press SET.
Customizing Onscreen Displays
For details on which onscreen displays can be customized, refer to
Onscreen Displays (A 52). For details on the setting options, refer to
[Custom Display 1] and [Custom Display 2] (A 150).
1 Open the [Custom Display 1] or [Custom Display 2] submenu.
[£ LCD/VF Setup] > [Custom Display 1] or [Custom Display 2]
2 Select the desired onscreen display.
3 Change the setting option and then press SET.
Operating modes:
Operating modes:
[w Other Functions]
[Custom Function]
Customizable Functions with [Custom Function]
Menu item Description
[Shockless WB] Creates a softer transition when the white balance is changed.
[Control Dial] Select the function of the control dial on the camcorder or grip unit.
[Control Dial Dir.] Changes the direction of the adjustment when operating the control dial on the camcorder.
[Grip Ctrl Dial Dir.] Changes the direction of the adjustment when operating the control dial on the grip unit.
[SELECT Dial Dir.] Changes the direction of the adjustment when operating the SELECT dial.
[F. Assist. B&W]
Automatically switches the screen to B&W while the focus assist functions (peaking and magnification) are activated. You
can have the screen switch to B&W when only the peaking is activated, when only the magnification is activated or when
both are activated.
[Scan Reverse Rec] Inverts the recorded image horizontally and/or vertically.
[Character Rec] When this function is set to [On], all of the onscreen displays will be recorded to the clip exactly as they appear on the screen.
[£ LCD/VF Setup]
[Custom Display 1]
[Custom Display 2]
COP
Y