Canon EOS C300 PL - Manual (Page 54)

Recording Video
54
1
Displayed also in mode.
2 In these shutter speed modes, only the denominator is displayed - indicates a shutter speed of 1/100, etc.
3 Only displayed while adjusting the setting.
4
Only when an optional WFT-E6 Wireless File Transmitter is connected to the camcorder.
CINEMA Preset
You can easily set the camcorder to use a number of preset picture-
related settings especially designed with professional cinematography
and motion picture production in mind. When you use the CINEMA preset
settings, the camcorder will use the advanced Canon Log gamma
(A 109) that makes full use of the new image sensor to achieve an
amazing dynamic range. On the other hand, other custom picture settings
will not be available.
1 Open the [/ CINEMA Locked] submenu.
[~ Camera Setup] > [/ CINEMA Locked]
2 Select [On] and then press SET.
• All picture-related settings will be set according to the CINEMA preset values.
• [/ LOCKED] appears on the left of the screen.
NOTES
• When Canon Log gamma is used, the image displayed on the screen will appear darker than usual. You can
use the view assistance function (A 109) to display an image that approximates the one that would be
obtained using a normal gamma setting.
1 White balance (A 66)
2 Time code settings: NDF Non-drop frame (A 74)
/EXT-LOCK External time code signal locked
(A 78) / HOLD Time code display on hold
(A 74)
3 Time code (A 73)
4 Audio level meter
1
(A 82, 83)
5 White balance fine-tuning (A 66)
6 ISO speed/ Gain (A 61)
7 Shutter speed (A 58)/White balance
Shutter speed
2
(mode set to [Speed], [Slow]
or [Off])
Shutter speed (mode set to [Angle])
Shutter speed (mode set to [Clear Scan])
White balance fine-tuning
3
(A 66)
White balance, color temperature
3
(A 67)
8 # Aperture value (A 64)
9 ND filter (A 63)
10 Approximate remaining battery time
1
11 Wi-Fi
4
(A 47)
12 CF card status and available recording time
1
Adjusting the Brightness of the Rear Panel
Repeatedly pressing the (backlight) button will change the brightness of
the rear panel in the following order: Backlight on (bright)
Backlight on
(dim) Backlight off.
[~ Camera Setup]
[/ CINEMA Locked]
[Off]
COP
Y