Cop y – Canon EOS C300 PL User Manual
Page 154
Menu Options
154
1
Not available in the [Photos] index screen.
2
The default value depends on the country/region or purchase.
3
Setting options for [Assign Button]: [(NONE)], [Peaking], [Zebra], [WFM (LCD)], [Edge Monitor], [Magnification], [Color Bars],
[Markers], [LCD Setup], [VF Setup], [LCD/VF B&W], [Onscreen Display], [Add Shot Mark 1], [Add Shot Mark 2], [Add $ Mark],
[Add % Mark], [Time Code], [Time Code Hold], [Headphone +], [Headphone -], [Audio Output CH], [Audio Level], [Photo],
[FUNC.], [FUNC. Shutter], [FUNC. ISO/Gain], [FUNC. WB], [My Menu], [Initialize Media], [User Setting (NONE)].
The default settings are as follows. [1]: [Magnification], [2]: [Peaking], [3]: [Zebra], [4]: [WFM (LCD)], [5]: [Headphone +], [6]:
[Headphone -], [7]: [Magnification], [8]: [WFM (LCD)], [9]: [Edge Monitor], [10] to [15]: [(NONE)].
4
Available in the clip index screen only.
5
Available in the clip index screen and [$ Mark] index screen only.
6
Available in the [Photos] index screen only.
7
Only appears when the optional WFT-E6 Wireless File Transmitter is attached to the camcorder.
[Reset]: Reset various camcorder settings.
[All Settings]: Resets all the camcorder’s settings to default settings, except for the hour meter.
[Camera Settings]: Resets the white balance, iris (# only), ISO speed, gain, shutter speed, [~ Camera
Setup] settings and custom picture settings to default settings.
[Assignable Buttons]: Resets the assignable buttons to default settings.
[Tally Lamp]: Allows you to set whether the tally lamp illuminates while the camcorder is recording.
[Media Access LED]: Allows you to set whether the CF card access indicators or the SD card access indicator
illuminates while the camcorder is accessing a CF card or SD card.
[Genlock Adjust.]: The phase difference between the external Genlock signal and the camcorder is initially set to
0. This function allows you to adjust it within the range of approx. ±0.4 H (-1023 to 1023). When setting to 1000
or more or -1000 or less, set the first field to 10 or -10, respectively.
[Clips] settings
[Title Prefix]: Determines the first 2 characters of the clip name. Combined with the [Number Setting] setting,
this constitutes the 6-character clip name.
[SDI Rec Command]
[On], [Off]
Ü
–
–
[Photo Numbering]
[Reset], [Continu.]
Ь
Ь
1
[Delete All Photos]
[Cancel], [OK]
–
Ü
6
[Add
/ File]
[To Clip]
[On], [Off]
Ü
–
[To Photo]
[On], [Off]
[Custom Function]
[Shockless WB]
[On], [Off]
Ü
–
[Control Dial]
# [Iris], [ISO/Gain], [Off]
$ [ISO/Gain], [Off]
[Control Dial Dir.]
[Reverse], [Normal]
[Grip Ctrl Dial Dir.]
[Reverse], [Normal]
[SELECT Dial Dir.]
[Reverse], [Normal]
[F. Assist. B&W]
[Both], [Magnify], [Peaking], [Off]
[Scan Reverse Rec]
[Both], [Vertical], [Horizontal], [Off]
[Character Rec]
[On], [Off]
[Reset Hour Meter]
[Cancel], [OK]
Ь
Ь
–
[Wi-Fi Remote]
7
[Set Up New]
For details refer to “WFT-E6 Wireless File
Transmitter - Guide for Canon Camcorders”
(PDF file).
Ü
–
–
[Select]
[Edit]
[Camera Settings]
[Initialize Media]
[CF A]
[Cancel], [OK]
Ь
Ь
[CF B]
[SD Card]
[Complete], [Quick]
Ь
Ь
[Firmware]
–
Ü
–
–
Menu item
Submenu
Setting options
A
COP
Y