Canon EOS C300 PL - Manual (Page 103)

103
Custom Picture Settings
Copying a File from the Camcorder to an SD Card
1 After selecting a file in the camcorder, open the [Copy To *] submenu.
[+ / Transfer File] > [Copy To *]
2 Select the file slot on the SD card under which to save the file and then
press SET.
• If there are available slots, you can select [New File] to save the file in the first available slot.
3 Select [OK] and then press SET.
• The currently selected file will be copied to the selected slot on the SD card, overwriting the file in that slot.
When the confirmation screen appears, press SET.
4 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custom picture
settings.
Replacing a File in the Camcorder with a File on an SD Card
1 After selecting a file in the camcorder to replace, open the [Load
From *] submenu.
[+ / Transfer File] > [Load From *]
2 Select the file to transfer to the camcorder and then press SET.
3 Select [OK] and then press SET.
• The file in the camcorder will be overwritten by the one on the SD card. When the confirmation screen
appears, press SET.
4 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custom picture
settings.
Copying a File from an SD Card to the Camcorder
1 After selecting a file on the SD card, open the [Copy To Cam.]
submenu.
[+ / Transfer File] > [Copy To Cam.]
2 Select the file slot under which to save the file and then press SET.
3 Select [OK] and then press SET.
• The currently selected file will be copied to the selected slot on the camcorder, overwriting the file in that
slot. When the confirmation screen appears, press SET.
4 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custom picture
settings.
Replacing a File on an SD Card with a File in the Camcorder
1 After selecting a file on the SD card to replace, open the [Load From
Cam.] submenu.
[+ / Transfer File] > [Load From Cam.]
2 Select the file to transfer to the SD card and then press SET.
3 Select [OK] and then press SET.
• The file on the SD card will be overwritten by the one on the camcorder. When the confirmation screen
appears, press SET.
4 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custom picture
settings.
[+ / Transfer File]
[Copy To *]
[+ / Transfer File]
[Load From *]
[+ / Transfer File]
[Copy To Cam.]
[+ / Transfer File]
[Load From Cam.]
COP
Y