Canon EOS C300 PL - Manual (Page 101)

101
Custom Picture Settings
Custom Picture Settings
You can preset a number of picture-related settings (A 104). After changing individual settings to your
preference, you can save the whole set in the camcorder or SD card as a custom picture file. You can then load
the file at a later date to change the current settings to the preset levels you selected. You can even embed the
custom picture settings in clips recorded to a CF card or photos recorded to an SD card. Conversely, you can
have the camcorder record clips and photos without embedding custom picture settings.
You can save up to 9 different custom picture files on the camcorder and up to 20 custom picture files on an SD
card. Custom picture files can be copied between the camcorder and recording media.
Custom preset files created with previous Canon camcorders are not compatible with this camcorder. Custom
picture files created with this camcorder are compatible only with other C300 and C300 PL camcorders.
Selecting Custom Picture Files
Select a custom picture file to apply its settings to your recordings or to
edit, rename, protect, or transfer it. When [~ Camera Setup] >
[/ CINEMA Locked] is set to [On], the custom picture menu cannot be
accessed and custom picture files cannot be used.
1 Press the CUSTOM PICTURE button.
• The custom picture menu appears. The currently selected file
appears next to the - icon or [Off] if no file is selected.
2 Select [ - / Select File] and then press SET.
• You can select from a list of custom picture files in the camcorder
and SD card. Files in the camcorder begin with [C1] to [C9]; those
on the SD card begin with [SD1] to [SD20].
3 Select the desired file and then press SET.
• Select [Off] to record without applying any custom picture settings.
• To apply the file’s settings, press the CUSTOM PICTURE button to exit the custom picture menu. An icon
representing the selected custom picture file will appear on the left of the screen.
• To perform other operations on the file, continue with the following procedures.
Editing a Custom Picture File’s Settings
1 After selecting a file, select [ , / Edit File] and then press SET.
2 Select a setting and then press SET.
Operating modes:
Preset Custom Picture Files
By default, the custom picture files in the camcorder in file slots [C8] and [C9] are protected. Remove the
protection (A 102) to edit the file. The following describes when to use the preset files.
[C8: CINEMA]: Uses the Canon Log gamma and color matrix for an outstanding dynamic range and an
image suitable for processing in post-production.
[C9: EOS Std.]: Reproduces the image quality and look (high contrast, vibrant colors) of an EOS digital SLR
camera with its picture style set to [Standard].
COP
Y