Agilent Technologies E8247C PSG CW - Manual (Page 207)

Chapter 10 197
Troubleshooting
Cannot Turn Off Help Mode
Cannot Turn Off Help Mode
1. Press
Utility
>
Instrument Info/Help Mode
2. Press
Help Mode Single Cont
until Single is highlighted.
The signal generator has two help modes; single and continuous.
When you press
Help
in single mode (the factory preset condition), help text is provided for the next key you
press. Pressing another key will exit the help mode and activate the key’s function.
When you press
Help
in continuous mode, help text is provided for the next key you press and that key’s
function is also activated (except for
Preset
). You will stay in help mode until you press
Help
again or change
to single mode.