Agilent Technologies E8247C PSG CW - Manual (Page 159)

Chapter 7 149
Custom Real Time I/Q Baseband
Working with Data Patterns
Using a User-Defined Data Pattern
User Files (user-defined data pattern files) can be created and modified using the signal generator’s Bit
File Editor or they can be created on a remote computer and moved to the signal generator for direct
use; these remotely created data pattern files can also be modified with the Bit File Editor. For information
on creating user-defined data files on a remote computer, see the programming guide.
These procedures demonstrate how to use the Bit File Editor to create, edit, and store user-defined
data pattern files for use within the custom real-time I/Q baseband generator modulation. For this example, a
user file is defined within a custom digital communication.
Creating a Data Pattern User File with the Bit File Editor
This procedure uses the Bit File Editor to create a Data Pattern User File and stores the resulting file in the
Memory Catalog (described on
page 52 ).
1. Press Preset .
2. Press
Mode
> Custom >
Real Time I/Q Baseband
>
Data
>
User File
>
Create File
.
This opens the Bit File Editor, which contains three columns, as shown in the following figure.
NOTE
When you create a new file, the default name is UNTITLED , or UNTITLED1 , and so forth.
This prevents overwriting previous files.
Hexadecimal Data File Name indicator Bit Data
Cursor Position
indicator (in Hex) Offset
(in Hex)