PNI TCM 2.6 - Manual (Page 40)

PNI Sensor Corporation DOC#1009269 r11
TCM2.5 & TCM2.6 User Manual Page 40 of 49
sp= (Set Sampling Period)
Description This command is used to set the sampling rate at which the data will be output in Hz.
NOTE: The function of this command has changed from the TCM2 in which the sp
was the clock divisor to derive the output rate.
Syntax sp=n
Output : [Ennn] <1f>
Valid Values
Input Description
1 1 Hz output rate
2 2 Hz output rate
3
3 Hz output rate
4
4 Hz output rate
5
5 Hz output rate
6
6 Hz output rate
7
7 Hz output rate
8
8 Hz output rate (default)
Table 20: Valid sp= Values
Example sp=4 !output rate 4 Hz
:
Query Response sp? :sp=