PNI TCM 2.6 - Manual (Page 36)

PNI Sensor Corporation DOC#1009269 r11
TCM2.5 & TCM2.6 User Manual Page 36 of 49
Valid Values
Input Description
e
Roll data enabled. It will be included from the output word. (Default setting)
d Roll data disabled. It will be excluded in the output word
Table 14: Valid er= Values
Example er=e !include roll data in output word
:
Query Response er? :er=
et= (Enable Temperature Data for Output Word)
Description Enables or disables temperature data for inclusion in the TCM2.5/2.6 Standard
Output Word.
Syntax et=n
Output :[Ennn]
Valid Values
Input Description
e
Temperature data enabled. It will be included from the output word.
d
Temperature data disabled. It will be excluded in the output word. (Default setting)
Table 15: Valid et= Values
Example et=e !include temperature data in output word
:
Query Response et? :et=