PNI TCM 2.6 - Manual (Page 33)

PNI Sensor Corporation DOC#1009269 r11
TCM2.5 & TCM2.6 User Manual Page 33 of 49
damping= (Set Digital Damping)
Description Enables or disables filtering of the output.
Syntax damping=n
Output :[Ennn]
Valid Values
Input Description
e enable damping
d disable damping (default setting)
Table 10: Valid damping= values
Example damping=e !enable damping
:
Query Response damping? :damping=
Related Commands timeconst= (set time constant for digital damping)
ec= (Enable Compass Data for Output Word)
Description Enables or disables compass data for inclusion in the TCM2.5/2.6 Standard Output
Word.
Syntax ec=n
Output :[Ennn]