PNI TCM 2.6 - Manual (Page 11)

PNI Sensor Corporation DOC#1009269 r11
TCM2.5 & TCM2.6 User Manual Page 11 of 49
Mechanically mounting the TCM2.5/2.6
Refer to the TCM2.5/2.6 Dimensional Specification later in this manual for the TCM2.5/2.6 board
dimensions and the orientation of the reference frame.
The TCM2.5/2.6 is factory calibrated with respect to the mounting holes, as shown below, thus it
must be aligned within the host system with respect to these mounting holes, not the board edges.
Figure 1: TCM2.5 Mounting Diagram
Figure 2: TCM2.6 Mounting Diagram