Alcatel Carrier Internetworking Solutions SpeedTouch Speed Touch Home Asymmetric Digital Subscriber Line (ADSL) Modem - Manual (Page 65)

7 Speed Touch Home Local Configuration
65 / 88
3EC 17058 AAAA TCZZA Ed. 02
"
Passive Software Version
Indicates the software version resident in the Speed Touch

Home, but not used. This could be a newer version which is yet
to be switched to active, but also a dormant older version.
"
Software Path Input Field
This field allows you to specify the path to the STHome software
upgrade package to be uploaded. You can also browse to it,
using the 'Browse' button.
In the header frame the following buttons can be found:
"
The button starts the upload process: the software
package indicated by the path, specified in the Software
Upgrade Input field, will be transferred to the STHome to
become the passive software version.
Prior to start an upload:
D A software package must be located by the software
Upgrade Input field.
D The passive software version field must be empty. This can
be done by pressing the
button in the top
banner.
"
Click to remove the passive software version
from the STHome.
"
Clicking switches active and passive software
versions after a successful upload. Your STHome will reboot and
come online again with the new version.
7.2 Command Line Interface via Telnet
Via the Ethernet interface of the STHome you can execute
Command Line Interface (CLI) commands from any PC on the LAN.
You must first gain access to the STHome, by opening a TCP/IP Telnet
session.
1. Open a Telnet session and supply STHome's IP address or DNS
hostname.
2. The STHome will prompt you with
User:
. Press 'Enter'.
3. If required, fill in the password.
4. The CLI prompt
=>
appears.
From the prompt you can enter your commands. Typing
help
will
show you the available commands.