Alcatel Carrier Internetworking Solutions SpeedTouch Speed Touch Home Asymmetric Digital Subscriber Line (ADSL) Modem - Manual (Page 31)

5 PPPoAĆtoĆPPTP Relaying for Microsoft Windows
31 / 88
3EC 17058 AAAA TCZZA Ed. 02
5.7 Configuring and Using PPTP Tunnelling on
Platforms running Microsoft Windows NT
This section describes how to create and setup a PPTP DialĆUp
connection over standard telephone lines and Virtual Private
Network connections over IP networks on a Windows NT platform.
Note Make sure that 'Microsoft Service Pack 3' has been installed on your
PC before you start creating PPTP tunnel sessions.
5.7.1 Installing PPTP on a Windows NT Platform
Before you can start creating PPTP tunnels, you must install the PPTP
networking protocol as follows:
1. DoubleĆclick 'Network' in 'Control Panel'.
2. The 'Network' Window appears. Select the 'Protocol' tab and
click .
3. The 'Select Network Protocol' Window appears.
Select the 'PointĆtoĆPoint Tunneling Protocol' from the list.
Click
.
4. Setup now needs to copy some Windows NT files and prompt
you for the proper path.
Specify the path and click
.
The installation will load all necessary PPTP files.
5. The 'PPTP Configuration' window appears (See figure 14),
asking how many VPNs you want to enable for access to this
server.
Figure 14 'PPTP Configuration' Window
Choose '4' (as an example) to create a maximum number of
four remote PPTP concurrent connections to this Remote Access
Services (RAS) server.
Click
to continue.