Alcatel Carrier Internetworking Solutions SpeedTouch Speed Touch Home Asymmetric Digital Subscriber Line (ADSL) Modem - Manual (Page 32)

5 PPPoAĆtoĆPPTP Relaying for Microsoft Windows
32 / 88
3EC 17058 AAAA TCZZA Ed. 02
6. A setup message appears.
Clicking initiates configuration of RAS.
Note You have now completed the first part of the installation, adding PPTP
as a remote protocol. The remaining steps of the installation
configure RAS for PPTP.
7. The 'Remote Access Setup' Window appears (See figure 15) and
lists a modem that is already setup in RAS.
To add the new VPN ports to 'RAS', click
.
Figure 15 'Remote Access Setup' Window
8. The 'Add RAS Device' window appears (See figure 16). Each
port must be added individually. To do so doubleĆclick on the
correct port and click
.
Repeat steps 7. and 8. until all VPN ports are listed in the 'Remote
Access Setup' window.
Figure 16 'Add RAS Device' Window
9. At this point, by default the ports are configured for dialĆin only.
To change this, select a port and click in the 'Remote
Access Setup' window.