Alcatel Carrier Internetworking Solutions SpeedTouch Speed Touch Home Asymmetric Digital Subscriber Line (ADSL) Modem - Manual (Page 47)

7 Speed Touch Home Local Configuration
47 / 88
3EC 17058 AAAA TCZZA Ed. 02
7.1.3 Initial Setup Web Page
Figure 24 'Initial Setup' Web Page
The Speed Touch  Home relies heavily on the TCP/IP Protocol for
its internal operation. IP requires a minimum set of parameters for
its proper operation:
"
IP address
"
Netmask
These IP parameters, which are for local communication only, can be
configured manually using this 'Initial Setup' web page, or
dynamically via the 'DHCP Configuration' web page (See section
7.1.9 for more).
As the STHome IP layer supports logical multiĆhoming (one interface
supporting multiple IP addresses), the manually configured IP
address and the dynamically required IP address are both active at
the same time.
Parameters on this page:
"
STHome MAC address
The unique Medium Access Control (MAC) address of the
STHome is displayed as Initial setup for xxĆxxĆxxĆxxĆxxĆxx".
It is used to identify your STHome on the LAN.