Alcatel Carrier Internetworking Solutions SpeedTouch Speed Touch Home Asymmetric Digital Subscriber Line (ADSL) Modem - Manual (Page 25)

5 PPPoAĆtoĆPPTP Relaying for Microsoft Windows
25 / 88
3EC 17058 AAAA TCZZA Ed. 02
5.3 Configuring DialĆUp Networking for Microsoft
Windows 9x (or later)
To configure a new connection on a Microsoft Windows 9x (or later)
platform, to your headquarters or an ISP, proceed as follows:
1. Activate the 'Make New Connection' application by
doubleĆclicking in the 'DialĆUp Networking' folder.
2. The 'Welcome to DialĆUp Networking' window appears
(this window appears only during first time use of the
'Make New Connection' application). Click
.
3. The 'Make New Connection' window appears (see figure 10).
Figure 10 Make New Connection Window
In the first input field, type the name or alias of the organization
you are connecting to. This name will appear below the newly
created icon at the end of this procedure.
In the 'Select a Device' listbox, you must select the 'Microsoft
Virtual Private Network (VPN) Adapter' for PPTP tunneling.
Note Windows 95 Users : If DialĆUp Networking has not been upgraded,
you cannot select the 'Microsoft VPN Adapter'. Upgrade according
section 5.5.
Click .