Connecting the atmf interface, Figure 9, Rear view for connecting the sthome – Alcatel Carrier Internetworking Solutions SpeedTouch Speed Touch Home Asymmetric Digital Subscriber Line (ADSL) Modem User Manual
Page 18: 2 connecting the atmf interface
3 Connecting the Speed Touch Home
18 / 88
3EC 17058 AAAA TCZZA Ed. 02
Power
DC
10Base T/MDI-X
ATMFĆ25
Defaults
Line
5
1
3
2
4
adsl 0782/ 01
Figure 9
Rear View for connecting the STHome
3.2
Connecting the ATMF Interface
The (optional) ATMF interface 2 is an ATM Forum 25.6 Mbit/s
compliant interface of type ATM Network Equipment.
"
Connect the PC (with an ATMF PCĆNIC card of type ATM End
Equipment) directly to the ATMF interface
2 via the LAN
cable.
"
To connect multiple PCs to the ATMF interface, an ATM switch is
required. Use a crossover cable between ATMF interface 2
and the ATM switch, since both are of type Network
Equipment".
Note
The Ethernet and ATMFĆ25 interfaces of the Speed Touch
Home
are designed for concurrent use.
There is no performance penalty on this simultaneous use except for
the sharing of upstream and downstream ADSL bandwidth.