Ethernet and atmfć25, System requirements, Figure 5 – Alcatel Carrier Internetworking Solutions SpeedTouch Speed Touch Home Asymmetric Digital Subscriber Line (ADSL) Modem User Manual
Page 13: Ethernet (b), 3 system requirements, 4 ethernet and atmfć25
ADSL
Ethernet
ATMFĆ25
Operating System
Local Configuration
2 Speed Touch Home Tour
13 / 88
3EC 17058 AAAA TCZZA Ed. 02
2.2.4
Ethernet and ATMFĆ25
There are 2 Speed Touch
Home versions: Ethernet only and
Ethernet + ATMFĆ25 (See figures 5 (a) and (b)).
Power Switch
Power
Socket
Ethernet
Interface
adsl 0645/ 01
Power Switch
Power
Socket
ATMF
Interface
Ethernet
Interface
adsl 0644/ 01
(a)
(b)
Figure 5
Rear panel with Ethernet Interface (a), or both
ATMFĆ25 and Ethernet (b)
Ethernet will be your natural choice for networking.
The ATMForum 25.6 interface provides excellent protocol
transparency and Native Asynchronic Transfer Mode (ATM)
application support.
2.3
System Requirements
ADSL service must be enabled on your telephone line.
"
A Personal Computer (PC)/workstation with an Ethernet
10BaseĆT PCĆNetwork Interface Card (NIC)
"
For local networking, a 10BaseĆT hub and the necessary
connection cables
"
A PC/workstation with an ATMFĆ25 PCĆNIC
"
For advanced networking, an ATM switch supporting ATMFĆ25
"
If the STHome is used in Bridging mode, it does not put any
requirements on the Operating System (OS).
"
When the STHome is used in PPPoAĆtoĆPPTP Relaying mode,
the OS must support local tunneling based on PPP/PPTP.
"
In case the ATMFĆ25 interface is used, see the manual of your
ATMFĆ25 PCĆNIC for additional requirements.
"
Command Line Interface (CLI): Telnet Application
"
HTTP/HTML: A Web browser