Alcatel Carrier Internetworking Solutions SpeedTouch Speed Touch Home Asymmetric Digital Subscriber Line (ADSL) Modem - Manual (Page 62)

7 Speed Touch Home Local Configuration
62 / 88
3EC 17058 AAAA TCZZA Ed. 02
Three fields are found on this web page:
"
DHCP Server Configuration Field
Allows you to specify the Speed Touch
 Home DHCP server
properties. The available DHCP server options are:
D Addresses ... through ...
Allows you to set the range of IP addresses that the DHCP
server can choose from.
D Subnet Mask
Is needed to specify the subnetting applied to the local
network. The default yields no subnetting.
D Lease Time
Specifies the lease time IP addresses can be assigned to a
device by DHCP.
D Default Gateway
Allows you to specify the IP address of the default gateway.
By specifying 'auto', there will be referred to the STHome.
D DNS Server
Allows you to specify the IP address of the DNS Server. By
specifying 'auto', there will be referred to the STHome.
"
DHCP Spoofing Field
This field has no meaning for the STHome and will result in an
error message if used.
"
DHCP Lease Table
This table shows current leases and allows you to manually
assign IP addresses to devices:
D Client ID, the MAC address to which an IP address is leased
D Address, the lease IP address
D State, indicates if the lease is on (device is up, running and
using the lease), off (device is unreachable), or has expired
(Timeout timer expired).
To add a lease manually, fill in the appropriate Client ID, the IP
Address of your choice for this client MAC address, and click
.