beautypg.com

Figure 22, Example of a pingćofćlife procedure – Alcatel Carrier Internetworking Solutions SpeedTouch Speed Touch Home Asymmetric Digital Subscriber Line (ADSL) Modem User Manual

Page 40

background image

6 Lost Speed Touch Home

40 / 88

3EC 17058 AAAA TCZZA Ed. 02

In figure 22 all these steps are shown as an example of resetting

STHome's IP Address to 10.0.0.145.

Figure 22

Example of a PingĆofĆLife Procedure

10. Browse to the STHome local web pages and click

to

make the new IP address permanent.

TIP

'Ping -t' command

You can avoid waiting 30 and then 60 seconds by proceeding as

follows:

1. If step 2. of the previous procedure is executed, continue as

below:

2. Ping the IP address with the command:

ping –t .

3. Power on the STHome.

4. After the POST, the STHome will reply to the ping.

5. Terminate the continuous ping by pressing CTRLĆC.

6. Save the IP address via the STHome local web pages.

Note

If your PC is equipped with multiple PCĆNICs, make sure that the

procedure is applied to the one connected to the STHome. Therefore

modify the arpĆsyntax as follows:

arp –
–N

In this syntax,

identifies the particular

PCĆNIC.