Milestone XProtect Essential 2014 - Manual (Page 150)

Milestone XProtect ® Essential 2014 Administrator's Manual
www.milestonesys.com 150 Advanced configuration
CPU threshold
Set a threshold for the CPU load on the Milestone Mobile server
before the system enforces video stream limitations.
Bandwidth threshold
Set a threshold for bandwidth load on the Milestone Mobile server
before the system enforces video stream limitations.
Max FPS
Set a limit for the maximum number of frames per second (FPS) to
send from the Milestone Mobile server to clients.
Max image resolution
Set a limit for the image resolution to send from the Milestone
Mobile server to clients.
Level 3
You can also select a Level 3 check box to create a third level for limitations. You cannot set any
settings higher than what you have set them to in Level 1 and Level 2. If you, for example, set the
Max FPS to 45 on Level 1 and to level 32 on Level 2, you can set the Max FPS on Level 3 only to 31
or below.
Name Description
Level 3
Select the check box to enable the second level of limitations to
Milestone Mobile server performance.
CPU threshold
Set a threshold for the CPU load on the Milestone Mobile server
before the system enforces video stream limitations.
Bandwidth threshold
Set a threshold for bandwidth load on the Milestone Mobile server
before the system enforces video stream limitations.
Max FPS
Set a limit for the frames per second (FPS) to send from the
Milestone Mobile server to clients.
Max image resolution
Set a limit for the image resolution to send from the Milestone
Mobile server to clients.
The system does not instantly switch from one level to another level. If your CPU or bandwidth
threshold goes less than five percent above or below the indicated levels, the current level stays in
use.
Note that if you enable Enable full-size images on the General tab, none of the Performance levels
are applied.
Log Settings
Fill in and specify the following log settings:
Name Description
Enabled
Enable/disable logging of Milestone Mobile client's actions in a
separate log file.
Log file location: Path to where log files are saved.
Keep logs for: Number of days to keep logs for (default 3 days).