FUTEK IPM650 Series - Manual (Page 91)

EM1004-B
- 91 -
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905
Toll Free: (800) 23 FUTEK
6.5.7 Power Output
Scroll to “ POWER OUTPUT ” from “INTERFACE ” options using the ▲▼ keys and press ENTER.
Use the
◄► keys to either disable or enable the Power Output.
Depending on the type of sensor that has already defined in the current sensor profile, a warning
message will be displayed when attempting to enable an input type which is not matched with the sensor
configuration. For example, if the active channel 2 is defined as a bridge input the following warning
message will appear on the screen when activating the Power Output:
Whenever the Power Output is enabled a check mark showing that this feature is enabled will be seen on
the display .
VOLTAGE OUTPUT
CURRENT OUTPUT
► POWER OUTPUT
BRIDGE INPUT
WARNING!
EXISTING SETTING
MAY BE CHANGED
ACCEPT CANCEL
SELECT DESIRED
ACTIVITY
USING ◄,► KEYS
[ENABLE]