Dwyer TIC - Manual (Page 73)

72
Appendix
Camera Care and Maintenance
Use the following procedures to clean the camera body, lens, LCD
monitor and other parts.
Camera Body
Wipe the body clean with soft cloth or eyeglass
lens wiper.
Lens
First use a lens blower to remove dust and dirt,
then remove any remaining dirt by wiping the lens
lightly with soft cloth.
•
Never use synthetic cleaners on the camera body or
lens.
LCD monitor
Use a lens blower brush to remove dust and dirt. If
necessary, gently wipe the LCD monitor with soft
cloth or an eyeglass lens wiper to remove stubborn
dirt.
•
Never rub or press forcefully on the LCD monitor.
These actions may damage it or lead to other
problems.
Never use thinners, benzene, synthetic cleaners or water to clean the
camera. These substances may distort or damage the equipment.