Dwyer TIC - Manual (Page 15)

14
Preparing the IR Camera
Charging the Battery Pack
Follow the steps below to charge the battery pack for the first time and
subsequently when the low battery icon appears on the Display Panel.
1
Align the edge of the battery
pack with the line on the
battery, then insert the battery
in the direction of the arrow.
2
Attach the power cord to the battery charger and plug the other
end into a power outlet.
• The charge indicator light is red while the battery pack is charging
and it turns green when charging is complete.
• After charging, unplug the battery charger and remove the battery
pack.
• This is a lithium ion battery pack so there is no need to discharge it
completely before recharging. It can be recharged at any time. However,
since the maximum number of charge cycle is approximately 300
(battery life), you are recommended to only charge the battery pack after
having discharge it completely to prolong battery life.
• Charging times will vary according to the surrounding humidity and
battery pack charge state.