Dwyer TIC - Manual (Page 68)

67
Connection and Download
Follow the steps to install the Bluetooth headset (optional) first time.
1
Turn off the camera and Bluetooth headset.
2
Turn on the Bluetooth headset
first.
Press and hold the power button
about 4 seconds. And then you
can see the power indicator
begins to blink red and blue. The
headset is in pairing status in 90
seconds.
3
Turn on the camera.
You can see the green indicator
of camera lights and the blue
indicator flashes at the same
time. In this mode, camera is
preparing to pair the Bluetooth
headset.
4
Press the power button of Bluetooth headset to pair the
headset and camera. When the pairing is successful,
blue indicator of the headset flashes slowly.
Then you can see the Bluetooth icon on the
middle-bottom screen, p.19.
Make sure that the camera is not too far from the Bluetooth
headset. If possible, try to take the Bluetooth headset
closer to the camera in step 4.
Use the *Bluetooth headset
The power
button and
the power
indicator.