Dwyer TIC - Manual (Page 43)

42
*Isotherm
Type
Sets the isothermal analysis mode. There are five
modes: Dual Above, Dual Below, Above, Below and
Interval.
Dual
Above
Display the isothermal interval in a
color and the parts with the higher
temperatures than the upper limit of
the isothermal interval in a different
color
Dual
Below
Display the isothermal interval in a
color and the parts with the lower
temperatures than the lower limit of
the isothermal interval in a different
color
Above
Display the isothermal interval and
the parts with the higher temperature
than the upper limit of the isothermal
interval in the same color
Below
Display the isothermal interval and
the parts with the lower temperature
than the lower limit of the isothermal
interval in the same color
Interval
Display the isothermal interval in one
color and all the other parts are
displayed in the normal pseudo color
mode
*Isotherm
Alert
The value is from 1 to 100, and it means 1/00 to
100/100 of the screen. For example, if the span of
isotherm is 35℃ to 40℃ and the isotherm alert is
50. If the proportion of isotherm area between 35℃
to 40℃ is over 50/100, alarm will ring.
*Temperature alert and isotherm settings are only for TIC-20 and TIC-30.