Dwyer TIC - Manual (Page 22)

21
Preparing the IR Camera
Local Settings
In this menu item, you can display the style of the built-in menu system.
1
Make sure that the IR camera is in null mode.(p.19)
2
Press the MENU/ENTER key then
press the UP or DOWN arrow on
the omni selector to select the
[System Setup] menu.
3
Press the UP or DOWN arrow on the
omni selector to select [Local Setup]
then press the MENU/ENTER key.
4
Local Setup.
•
Press the UP or DOWN arrow on
the omni selector to select a field to
change.
•
Press the LEFT or RIGHT arrow on
the omni selector to set the values.
5
After adjusting the settings, press the Menu/ Enter key to
save changes, or press the C key to exit without saving.