Dwyer TIC - Manual (Page 49)

48
Shooting
Fulfill the Analysis Function
*Isotherm analysis
1
Press the MENU/ENTER key.
2
Press the UP or DOWN arrow on the
omni selector to select the
[Analysis] menu.
3
Press UP or DOWN arrow to select
[Isotherm], then press the
Menu/Enter key. Areas of concern
will be highlighted with color.
4
Setting isotherm range.
•
Start from Step 1 to set or select
isotherm analysis.
•
Press the UP or DOWN arrow on the
omni selector to select isotherm
range.
•
IL and IH will appear at the bottom
right corner. It is the high limit (IH) and
low limit (IL) of the isotherm range.
To change isotherm type, isotherm width, isotherm alert and highlight
color, see p.41.
*TIC-10 doesn’t have the isotherm analysis function, so you won’t see
the [isotherm] item in its analysis menu.