Dwyer TIC - Manual (Page 46)

45
Shooting
Fulfill the Analysis Function
*Area analysis
1
Press the MENU/ENTER key.
2
Press the UP or DOWN arrow on the
omni selector to select the [Analysis]
menu.
3
Press the UP or DOWN arrow on the
omni selector to select the [Area]
menu.
4
Setting the analysis area.
•
Press the UP or DOWN arrow on the omni
selector to select an area, then press
MENU/ ENTER
Key. One or more boxes
will appear on the screen.
•
A reading will appear at the top right
corner. It is the reading of the
highest/lowest/average temperature of the
current area.
•
H is short for highest temperature, L for
lowest temperature, and A for average
temperature.
•
Press LEFT or RIGHT to select to show
the Maximum or Minimum or Average
temperature of the area.
•
If Area 5 is selected, Maximum and
Minimum and Average temperature of it
will appear at the same time.