Dwyer TIC - Manual (Page 33)

32
Shooting
IR Camera Adjustment
Manual adjust
You can adjust the Level and Span of the image manually in the
built-in menu system or by pressing arrows on the omni selector.
Press UP or DOWN arrow to change the span, and press LEFT
or RIGHT
arrow to change the level.
Manual adjust in the menu
1
Press the MENU/ENTER key.
2
Press the UP or DOWN arrow on
the omni selector to select the
[Manual Adj.] menu.
3
Setting Level and Span.
•
Press the UP or DOWN arrow on
the omni selector to select an item
to change.
•
Press the RIGHT or LEFT arrow on
the omni selector to set the values.
4
After this operation, press the MENU/ENTER key to save
changes, or press the C key to go back to the upper menu
without saving.