Dwyer TIC - Manual (Page 30)

29
Shooting
IR Camera Adjustment
In DuoVision display mode, you can see
the thermal images “fuse” into the visible
images.
IR only
In this mode, you can use the
analysis tools to analyze the target.
But what you see is the image with
pseudo color.
Vision Only
In this mode , you can see the image
with full color. But you can not use
any analysis tools to analyze the
target.
Duo Vision
In this mode, you can see the
background image is full color visible
image. And the thermal image “fuses”
on it in the center square. At the same
time you can use any analysis tools to
analyze the target.
In the IR and Vision Mix mode, you can press UP or DOWN arrow
to change the span(contrast) of the IR image and press LEFT or
RIGHT
arrow to change the level(brightness).