beautypg.com

Navigation, Password protection, Adjusting customer control settings – Airedale BluCube 10-48kW User Manual

Page 56: Blucube ™ condensing unit

background image





BluCube

Condensing Unit

56

Condensing Units

Installation and Maintenance Manual : 7222094 11/2013

Navigation


The following instructions refer to the built-in display keypad buttons. See the table above for the corresponding buttons if
using the remote keypad.

Initially, use the

button to access the main navigation menu. The first menu UNIT ON/OFF will be selected.

Use the

or

buttons to move to the desired menu. The selected menu will be highlighted with a black bar.

Press

to enter the selected menu.


Navigation Sub Menus


There are eight sub menus available from the main navigation menu, these are listed below:

A. Unit On/Off

Switch on or switch off the unit.

B. Setpoints

View the user setpoints.

C. Clock/Scheduler View the current time and date and set on/off timezones.
D. Input/Output

View the status of the controller inputs and outputs.

E. Alarm Log

View the alarm log.

F. Board Switch

Change the controller pLAN board address.

G. Service

View maintenance related parameters, such as hours run, sensor calibration
and manual overrides.

H. Manufacturer

Manufacturer menu and adjustment of various manufacturer related parameters,
such as unit configuration and timing settings.

Password Protection


To guard against unauthorised adjustments, a password is required to gain access to certain menus. The passwords for
the sub menus are defined as follows:

SERVICE SETTINGS

}

4648

CLOCK/SCHEDULER

SETPOINTS

MANUFACTURER

See Airedale

When a password is requested use the

or

keys to enter the number and

to access the page.

Adjusting Customer Control Settings


Use the correct keys to access the parameters to be adjusted (refer to Parameters List and Factory Values).

After entering the correct password the cursor will appear at the top left corner (Home location).

Use the

or

keys to move to the desired menu.

To move the flashing cursor to the required adjustable fields press

and the

or

keys to change the values.

Press the

key to move the cursor to the next field or Home location.

When the cursor is Home either use the

or

keys to scroll to the next sub-menu or the

key to exit and

return to the Main Menu page.