West Control Solutions KS 50-1 - Manual (Page 6)

a
Safety switch 10V
i mA/Pt and U<-> I always in position left or right.
Leaving the safety switch open may lead to faulty functions!
l
Caution! The unit contains ESD-sensitive components.
Mounting
6 KS50/52-1
Name of safety
switch
Position Remark Factory
setting
10V i mA/Pt right Current signal / Pt100 / thermocouple at
InP.1
l
left Voltage signal at InP.1
Loc open Levels as set using the BlueControl
®
eng. tool
(default):
- Access to controller off / self-tuning / extended
operating level = enabled
- Password
PASS= OFF
- Access to parameter setting level /
configuration level /
calibration level= disabled
close all levels accessible wihout restriction
l
U<-> I
only valid for
KS5.-1.4-.....-...
KS5.-1.5-.....-...
right (I) Current / logic on output 3 "OUT3"
l
left (U) Voltage on output 3 "OUT3"