West Control Solutions KS 50-1 - Manual (Page 35)

Name Value range Description Default
C.oFF
Switching off the controller 0
0 no function (switch-over via interface is possible)
2 DI1
3 DI2 (only visible with OPTION)
4 DI3 (only visible with OPTION)
5
è - key
6
Ò - key
m.Loc
Blockage of hand function 0
0 no function (switch-over via interface is possible)
2 DI1
3 DI2 (only visible with OPTION)
4 DI3 (only visible with OPTION)
5
è - key
Err.r
Reset of all error list entries 0
0 no function (switch-over via interface is possible)
2 DI1
3 DI2 (only visible with OPTION)
4 DI3 (only visible with OPTION)
5
è - key
6
Ò - key
booS
Boost function: setpoint increases by
SP.bo for the time t.bo
0
0 no function (switch-over via interface is possible)
2 DI1
3 DI2 (only visible with OPTION)
4 DI3 (only visible with OPTION)
5
è - key
Pid.2
Switching of parameter set (Pb, ti, td) 0
0 no function (switch-over via interface is possible)
2 DI1
3 DI2 (only visible with OPTION)
4 DI3 (only visible with OPTION)
5
è - key
P.run
Programmer Run/Stop (see page 55) 0
0 no function (switch-over via interface is possible)
2 DI1
3 DI2 (only visible with OPTION)
4 DI3 (only visible with OPTION)
5
è - key
di.Fn
Function of digital inputs (valid for all inputs) 0
0 direct
1 inverse
2 toggle key function
fDI1
fDI2
fDI3 Forcing di1/ di2 / di3 (only visible with BlueControl!) 0
0 No forcing
1 Forcing via serial interface
Configuration level
KS50/52-1 35 Configurations