Metex 8760CLP Total Free Chlorine & pH Analyzer - Manual (Page 12)

AQUAMETRIX INC.
1-800-742-1413 www.aquametrix.com
12
INSTALLATION
Analyzer Mounting
The model 8760CLP comes as a complete sample conditioning system. The analyzer is mounted on a
CPVC panel with a dual flow cell containing the pH and chlorine sensors. The sample conditioning
system includes a pressure regulator valve, sample point and atmospheric drain. The only installation
requirement of the user is to mount the panel and supply plumbing to the inlet and from the outlet.
The panel mounts on a wall via four ⅜ inch bolts at 12¼ inch x 24¼-inch centers; refer to drawing
D4040081 for mounting dimensions. Sample inlet and outlet plumbing hookup is via a ½ in barb fitting.
Analyzer Wiring
Illustration 7: 8760CLP component identification
8760CLP Component
Identification
A) Identification label; indicates complete model
number and serial number
B) Analyzer, model 8760CL
C) pH sensor, P/N AM-A2104033
D) Chlorine sensor, P/N AM-A2104034
E) Atmospheric drain
F) Flow cell; a cleaning injection port is located
on the underside of the chlorine sensor flow cell
housing (hidden from view by the pressure
gauge)
G) Pressure gauge
H) Pressure regulator
I) Flow control/shut-off valve
J) Inlet
K) Outlet