KROHNE OPTIWAVE 6300C EN - Manual (Page 82)

8
TECHNICAL DATA
82
OPTIWAVE 6300 C
www.krohne.com 03/2014 - 4000547004 - HB OPTIWAVE 6300 R04 en
Measurement accuracy
Resolution 1 mm / 0.04¨
Repeatability ±1 mm / ±0.04¨
Accuracy ±3 mm / ±0.12¨, when distance < 10 m / 33 ft;
±0.03% of measured distance, when distance > 10 m / 33 ft
Reference conditions acc. to EN 60770 Reference conditions acc. to EN 60770 Reference conditions acc. to EN 60770 Reference conditions acc. to EN 60770
Temperature +20°C ±5°C / +70°F ±10°F
Pressure 1013 mbara ±20 mbar / 14.69 psia ±0.29 psi
Relative air humidity 60% ±15%
Target Metal plate in an anechoic chamber
Operating conditions
Temperature Temperature Temperature Temperature
Ambient temperature -40…+80°C / -40…+175°F (according to the temperature limits of the gasket
material. Refer to "Materials" in this table.)
Ex: see supplementary operating instructions or approval certificates
Storage temperature -40…+85°C / -40…+185°F
Flange temperature Horn / Sheet metal horn antenna: Horn / Sheet metal horn antenna: Horn / Sheet metal horn antenna: Horn / Sheet metal horn antenna:
Standard: -50…+150°C / -58…+300°F
Option: -50…+200°C / -58…+390°F
(the process connection temperature must agree with the temperature limits of the
gasket material. Refer to "Materials" in this table.)
Ex: see supplementary operating instructions or approval certificates
Drop antenna (PTFE): Drop antenna (PTFE): Drop antenna (PTFE): Drop antenna (PTFE):
-50…+150°C / -58…+300°F (the process connection temperature must agree with
the temperature limits of the gasket material. Refer to "Materials" in this table.)
Ex: see supplementary operating instructions or approval certificates
Drop antenna (PP): Drop antenna (PP): Drop antenna (PP): Drop antenna (PP):
-40…+100°C / -40…+210°F (the process connection temperature must agree with
the temperature limits of the gasket material. Refer to "Materials" in this table.)
Ex: see supplementary operating instructions or approval certificates
Pressure Pressure Pressure Pressure
Operating pressure Drop antenna (PP): Drop antenna (PP): Drop antenna (PP): Drop antenna (PP):
-1…16 barg / -14.5…232 psig;
subject to process connection used and flange temperature
Drop antenna (PTFE): Drop antenna (PTFE): Drop antenna (PTFE): Drop antenna (PTFE):
-1…40 barg / -14.5…580 psig;
subject to process connection used and flange temperature
Horn / Sheet metal horn antenna: Horn / Sheet metal horn antenna: Horn / Sheet metal horn antenna: Horn / Sheet metal horn antenna:
Standard: -1…40 barg / -14.5…580 psig;
subject to process connection used and flange temperature