Installation, 3 transport 3.4 pre-installation requirements – KROHNE OPTIWAVE 6300C EN User Manual

Page 17

Text mode
Original mode

INSTALLATION

OPTIWAVE 6300 C

www.krohne.com

03/2014 - 4000547004 - HB OPTIWAVE 6300 R04 en

3.3 Transport

3.4 Pre-installation requirements

• Make sure that there is sufficient space on all sides.
• Protect the signal converter from direct sunlight. If necessary, install the weather protection

accessory.

• Do not subject the signal converter to heavy vibrations. The devices are tested for vibration

and agree with EN 50178 and IEC 60068-2-6.

Figure 3-2: How to lift the device

1 Remove the converter before you lift the device with a hoist.

WARNING!
Lift the device carefully to prevent damage to the antenna.

INFORMATION!
Obey the precautions that follow to make sure that the device is correctly installed.