KROHNE OPTIWAVE 6300C EN - Manual (Page 13)

DEVICE DESCRIPTION
2
13
OPTIWAVE 6300 C
www.krohne.com 03/2014 - 4000547004 - HB OPTIWAVE 6300 R04 en
2.2 Device description
This device is a 24 GHz FMCW-radar level transmitter. It is a non-contact technology and is 2-
wire loop-powered. It is designed to measure the distance, level, mass, volume and reflectivity
of granulates and powders.
Radar level transmitters use an antenna to guide a signal to the surface of the measured
product. The device has many antennas available. Thus, it can measure most products even in
difficult conditions. Also refer to
Technical data on page 80.
The device has a set-up wizard, fully-potted electronic circuit boards and online help functions.
You usually will not need this Handbook to install, set up and operate the device.
If it is ordered with the applicable options, it can be certified for use in hazardous areas.
These output options are available:
• 1 output: 4...20 mA (HART)
• 2 outputs: 4...20 mA (HART) + 4...20 mA
These accessories are available:
• Stainless steel weather protection.
• RS232 / HART
®
converter (VIATOR).
• USB / HART
®
converter.
• 2° PP slanted flange
INFORMATION!
For more data on accessories, refer to List of accessories on page 114
.