Operation – KROHNE OPTIWAVE 6300C EN User Manual
Page 40
6
OPERATION
40
OPTIWAVE 6300 C
www.krohne.com
03/2014 - 4000547004 - HB OPTIWAVE 6300 R04 en
Screens in operator mode
Text and image
screen
Go to
% current output
screen
Go to
Text screen
Go to
[
]
[
]
[
]
Level
[>>>>]
Level
>
Level
> (Text
and
image)
[
] / [
]
[
] / [
]
[
] / [
]
Distance
[>>>>]
Distance
[>>>>]
Distance
[>>>>] (Text
and
image)
[
] / [
]
[
] / [
]
[
] / [
]
Volume
1
[>>>>]
Volume
1
[>>>>]
Volume
1
[>>>>] (Text
and
image)
[
] / [
]
[
] / [
]
[
] / [
]
Mass
2
[>>>>]
Mass
2
[>>>>]
Mass
2
[>>>>] (Text
and
image)
[
] / [
]
[
] / [
]
[
] / [
]
Ullage volume
1
[>>>>]
Ullage volume
1
[>>>>]
Ullage volume
1
[>>>>] (Text
and
image)
[
]
[
]
[
] / [
]
Back to the top of the
list
Back to the top of the
list
Reflectivity
[
] / [
]
Signal screen
3
[
]
Back to the top of the
list
1 This data is only available if you created a volume table. Refer to the conversion quick setup menu in supervisor mode.
2 This data is only available if you created a mass table. Refer to the conversion quick setup menu in supervisor mode.
3 This screen shows a graph of discrete radar reflection signals against distance. This graph is used to monitor reflec-
tions measured by the device. Push [>] to move the cursor from one signal peak to another.