beautypg.com

GW Instek GDS-2000 training manual User Manual

Page 37

background image

GLA-1000 ADVANCED

37

4. Open the GLA application software.

5. Set the memory size to 128k.

6. Group B0 ~ B7 into a bus by highlighting B0 ~ B7 and pressing

Ctrl key + G, or calling right-click context menu.

7. Click the start icon or press F5 and capture the signal once.

8. Enter 50us in the display range and observe the data. Make sure

“Bus1” shows the accumulating sum of B0 ~ B7.

9. Continue with each demonstration.

Note:

If you have not installed GLA application software yet,
refer to Installation in GLA user manual.