beautypg.com

Set up the environment – GW Instek GDS-2000 training manual User Manual

Page 12

background image

GDS-2000 Series Training Manual

12

2. Set up the Environment

Here you will learn how to setup measurement environment: select
the menu language, reset GDS-2000, and adjust the display contrast.

1. Press the Utility key → F4 (Language). Press F4 repeatedly to

select the menu language of your choice.

Utility

Language

English

F 4

2. Press the Save/Recall key → F1 (Default Setup) to reset GDS-

2000 front panel. Make sure that Channel1 becomes active (CH1
key LED turns ON) and a horizontal line appears at the center.

Save/Recall

Default

Setup

F 1

3. Go to the next step.

Note:

For a complete list of the default setup contents, see Quick
Reference → Default Settings
in GDS-2000 user manual.

You can also activate the channel manually by pressing
the CH key.

If the display is too dark or bright, press the Display key

F4 (Contrast) and use the VARIABLE knob to adjust

the contrast.

Display

Contrast

F 4

VARIABLE