GW Instek GDS-2000 training manual - Manual (Page 21)

GDS-2000 ADVANCED
21
6. Press the CH2 key to activate CH2.
CH2 CH2
7. Press the Display key → F1 (Vector) to select vector drawing.
Display
Type
Vectors
F 1
8. Press the Auto Set key. GDS-2000 automatically adjusts the
horizontal, vertical, and trigger setting.
Auto Set
Now the display should look like the following: CH1 and CH2
showing 1kHz sine wave on top and bottom half of the display,
respectively.
9. Continue with each demonstration.
Note: If one or more of the demonstrations do not work
properly, reset the system according to the above steps.