GW Instek GDS-2000 training manual - Manual (Page 25)

GDS-2000 ADVANCED
25
Automatic Measurement (Overshoot)
Background Using the automatic measurement function, you
can easily measure the waveform, including the
rise and fall overshoot.
Connection
CH1
CH1 Scale 50ns/div, 100mV/div
(if CH1 is still unstable, increase the trigger level)
1. Press the Measurement key. The menu shows five types of
measurement results.
Measure
2. Press F1, turn the VARIABLE knob until the measurement item
(F3) changes to ROVShoot (Rise overshoot), then press F5
(Previous Menu). The F1 menu reflects the new measurement.
Vpp
1:344mV
2:24.0mV
F 1
VARIABLE
Voltage
ROVShoot
F 3
Previous
Menu
F 5
3. Repeat the same step with F2, this time FOV (Fall overshoot).
Demonstration completed