beautypg.com

Save data using hardcopy function – GW Instek GDS-2000 training manual User Manual

Page 17

background image

GDS-2000 TUTORIAL

17

7. Save Data Using Hardcopy Function

Here you will learn how to save the waveform data, waveform
image, and panel setup into a USB flash drive.

1. Connect a USB flash drive to the front panel USB port.

2. Press the Utility key → F1 (Hardcopy) → F1 (Save All).

Utility

Hardcopy

Menu

F 1

Function

Save All

F 1

3. To invert the color of waveform image file, press F2 (Ink Saver).

Ink Saver

Off

F 2

Ink Saver Off

Ink Saver On

4. Press the Hardcopy key. The following data will be saved in a

folder “ALL0000”. The following is the folder contents:
* Waveform image “A0000DS.bmp”
* Waveform data “A0000xxx.csv”
* GDS-2000 setup data “A0000DS.set”

Hardcopy

5. The GDS-2000 tutorial is completed. For advanced learning, read

the following GDS-2000 Advanced chapter.

Note:

For data saving details, see Save/Recall in the user manual.