GW Instek GDS-2000 training manual - Manual (Page 16)

GDS-2000 Series Training Manual
16
6. Compensate the Probe
Here you will learn how to adjust probe sensitivity by compensating
overshoot or undershoot.
1. Press the Acquire key → F3 (Average). Press F3 repeatedly until
the average number becomes 16.
Average
16
F 3 Acquire
2. Adjust the probe to make the waveform edge flat.
Under compensation Normal Over compensation
3. Press the Auto Set key and view the compensated waveform.
Auto Set
4. Go to the next step.