GW Instek GDS-2000 training manual - Manual (Page 15)

GDS-2000 TUTORIAL
15
5. Adjust Waveform Scale and Position
Here you will learn how to manually change the horizontal and
vertical scale and move the waveform position.
1. Turn the TIME/DIV knob clockwise by one
notch to change the horizontal scale to
100us/div.
TIME/DIV
2. Turn the horizontal POSITION knob counter-
clockwise, until the waveform edge moves
three divisions to the left.
POSITION
3. Turn the Channel1 VOLTS/DIV knob
clockwise by one notch to change the vertical
scale to 20mV/div.
VOLTS/DIV
4. Turn the vertical POSITION knob counter-
clockwise, until the waveform edge is located at
two divisions above the center.
POSITION
5. Go to the next step.
Note: For details, see Configuration → Horizontal View and
Vertical View in the user manual.