GW Instek GRF-1300A - Manual (Page 14)

GRF-1300A User Manual and Teaching Materials
7. There are five test points (Tp1, Tp2, Tp3, Tp4, Tp5) on the
panel. These five test points are set at different points in the
circuit path of the connected modules. Their specific locations
are as shown in the Figure below. They are turned on or off
by their corresponding relays (B1, B2, B3, B4, B5). An
oscilloscope can be used to detect/determine the status of the
circuitry at these test points.
Figure A-7.
Circuit location of
each test point
T
P1
T
P3
T
P2
T
P4
B
1
B
3
B
2
B
4
8. Install the GRF-1300A driver onto the PC.
• Connect the GRF-1300A to the PC. Below are the steps for
installing the software. Add the install software to the
install directory. Click next and a window as shown below
appears.
12